SALIENT FEATURES

• Compact Design & Mobile.
• Finely requlable 0-700mm Hg. Vacuum-easy to read off.
• Dual Safety System:  Over-Flow check valve and Removable filter to protect the pump from entrained moisture.
• Non-collapsible tubing with flexible snug fit mounts.
• Auto Lubrication by Oil Pump for Noiseless and Trouble Free Performance.
• Cord Stowing Arrangement.
• Confirming to ISI specifications.

TECHANICAL SPECIFICATIONS

Max Vacuum         :         700 + 10% mm Hg. Regulable through Vacuum

control knob.

Suction Capacity  :         40 Ltrs./min.

Vacuum Gauge     :         Bourden Type 10 cm. dia. 0-760 mm Hg.

Caliberation.

Suction Bottle      :         2 × 1600cc Wide mouthed with self sealing

Rubber Bungs and over-Flow check Value

(Float Type).

Vacuum Pump     :         Rotary type

Sound                 :         Almost Whispers

Power Source     :         AC220V Single phase.

Finish                  :         Pre-treated and EPOXY POWDER COATED.

MEGA VAC Suction Apparatus Built with ½ H.P.  Motor has been specially designed to meet the new levels of requirements as today’s Modern Surgical Technique Demands.  Ideal for MTP and Other major Surgical Applications.

Model  F-20

SALIENT FEATURES

• ‘Portable Pedal Suction with Vertical Pump.
• Maximum Vacuum 760 mm Hg. With Average Per Stroke volume of 250 ml.
• Efficient Piston Pump for Creating vacuum instantly.

SALIENT FEATURES

• Compact Design & Mobile unit with wide application range.
• Finely regulable 0-700mm Hg. Vacuum-easy to read off.
• Dual Safety System : Over-Flow check valve and Removable Filter to Protect the pump from entrained moisture.
• Non-collapsible tubing with flexible snug fit mounts.
• Auto Lubrication by Oil Pump for Noiseless and Trouble Free Performance.
• Cord Stowing Arrangement.
• Confirming to ISI specifications.

TECHNICAL SPECIFICATIONS

Max Vacuum       :         700+ 10% mm Hg Regulable through Vacuum

control knob.

Suction Capacity  :         25 Ltrs./min/

Suction Bottle      :         2 × 1600 cc Wide mouthed with self sealing

Rubber Bungs and over-flow check Valve

(Float Type).

Vacuum Pump     :         Rotary type

Sound                            :         Almost Whispers.

Finish                             :         Pre-treated and EPOXY POWDER COATED.

AS-20 Suction Apparatus Built with ¼ H.P. Motor mobile unit for surgical applications suitable for E.N.T., Dental & other minor Procedures.

Model :  MH -20

SALIENTREATURES

1) Portable Pedal Suction with Horizontal Pump.

2) Maximum Vacuum 760 mm Hg with Average Per Stroke volume of 50 ml.

3) Efficient Piston Pump for Creating vacuum instantly.

SALIENTREATURES

• Radial Locking arms with pedal lifting device for lighten & lifting of lid.
• Triple walled, inner chamber, Jacket, outer wall and lid made of SS-304.
• Space between outer wall and jacket duly insulated with glass wool to minimize temperature loss.
• Molded joint less neoprene rubber gasket.

SPECIFICATIONS

• Auto Pressure Control device (auto cut off safety device for over heating) to maintain the required pressure.
• One hour timer switch adjustable for any required time for sterilization and after that period this will disconnect the mains.
• Alarm switch for the indication of pressure.

STANDARD ACCESSORIES

• Water Level Indicator
• Pressure Gauge
• Drain and water inlet valve
• Spl. V. Release Valve
• Safety valve spring loaded.

SIZES

• 12” × 20” (Double Drum)
• 16” × 24” (Double Drum)
• 18” × 24” (Double Drum + Extra Space for long Instrument etc.)
• 12: × 30” (Three Drum)
• 16” × 40” (Three Drum + Space for Orth. Implants/Instruments etc.)

HIGH PRESSURE HIGH SPEED STEAM STERILIZER WITH STEAM STOCK FACILITY

for dry sterilization steam stock in the outer side of chamber which is called  steam jacket, steam inlet into the chamber by a valve.  After sterilization steam release of chamber by valve & steam remained stored in out side of chamber.

SALIENT FEATURES

• SHEEL consist of chamber and jacket.  The Chamber is made of thick stainless steel sheet.  To minimize the heat loss the shall been insulated with glass wool and covered with stainless steel SS304 cover.
• The whole shell is mounted on a sturdy M.S. tubular stand.
• BOILER is fitted with Auto Pressure Control Device to set and maintain the chamber pressure by cutting on/off the electric supply to heater.  It also economizes the power consumption.
• DOOR is made of thick stainless steel Plate.  Door has a safety mechanism which automatically locks when chamber is under pressure.  This prevents opening of door under pressure to preclude any eventuality of accident.
• Sterilization cycle is controlled by three way valve or multi port valve stainless steel.

STANDARD ACCESSORIES

• Auto Pressure Control device (auto cut off safety device for over heating) to maintain the required pressure.
• One hour timer switch adjustable for any required time for sterilization and after that period this will disconnect the mains.
• Alarm switch for the indication of pressure.
• Water inlelt/outlet valve.
• Water level indicator and safety valve fitted with boiler.
• Pressure gauge, jacket safety valve fitted with jacket.

OPTIONAL ACCESSORIES

• Instrument Rack with Tray
• Automatic Low Water Level Cut off device.

A unique hydraulic operating table specially designed to provide complete flexibility for patient positioning required for modern surgeries.  Constructed with high grade stainless stell with fully rust proof design.  All fittings and accessories are made of stainless steel.

FEATURES

• Five Sectional stainless steel top.
• Hydraulic UP/Down.
• Standard Positioning :-  Height Up/Down, Trendelenberg / Reverse Trendelenberg, Lateral tilt both sides, Flex/Reflex, Chair, Kidney Elevation and Lithotomy position.
• Mobile on Smooth running castors.
• Floor Lock facility

STANDARD ACCESSORIES

• Antistatic waterproof Rubber Mattress 50 mm.
• Pair of S.S. Arm Board with Mattress.
• Anaesthetic Frame.
• Pair of Padded lateral support.
• Pair of padded shoulder support.
• Pair of Lithotomy leg crutches holder with straps.
• Accessory clamps made of stainless steel.

Electro / Remote Operated ‘C- Arm’ Compatible Operating Table

FEATURES

• The Electro/remote driving mechanism assures smooth and quiet movements of the Table Top.
• Operating positons including Height Adjustment, Trendelenburg, Reverse Trendelenburg, Lateral Tilt and Back section can be controlled quickly and accurately with the help of lightweight Hand Control Unit/Remote control.
• The eccentrically positioned Table Top X-ray Translucent, four section/five section to optimize image intensifier accessibility position for both A/P & Lateral Exposures.
• Mobile on smooth running castors & Floor locking system for stability.
• Interchangeable, Detachable & Adjustable Head & Leg sections.
• Base, Column covers and side rails & all accessories / clamps are made of Rust free Stainless Steel for easy cleaning and hygiene.
• Heavy & sturdy base allowing maximum foot room for operating team.

Electro / Remote Operated  ’C-Arm Compatible Operating Tabel

Standard Accessories

1) L-Shaped Anaesthetic Frame           :         1 Pc.

2) Shoulder Support with Pad              :         1 Pair

3) Arm Board with S.S. Top                 :         1 Pair

4) Lateral Support with Pad                 :         1 Pair

5) Lithotomy Crutches                        :         1 Pair

6) Waterproof rubber Mattress    :         1 Set

Neuro & Spine Surgery attachments

1) Spinal Bridge

2) Horse Shoe type / ‘M’ type head rest

3) Mavfield  three pin head fixator clamb for prone /sitting possition

FEATURES

• The eccentrically positioned Table Top X-ray Translucent, four section / five section to optimize image intensifier accessibility position for both A/P & Lateral Exposures.
• Mobile on smooth running castors & Floor locking system for stability.
• Interchangeable, Detachable & Adjustable Head & Leg sections.
• Base, Column covers and side rails & all accessories / clamps are made of Rust free Stainless Steel for easy cleaning and hygiene.
• Heavy & sturdy base allowing maximum foot room for operating team.

STANDARD POSITIONING

• Hydraulic UP/Down
• Precise and efficient crank mechanism to obtain trendelenberg/reverse trendelenberg
• Lateral tilt both sides
• Flex & Reflex
• Chair Position

OPTHOPAEDICS ATTACHMENT ACCESSORIES

• Wholly made of stainless steel consists of following.
• Orthopaedic leg traction device
• Broad Hand Surgery Table with telescopic support and mattress.
• L-shaped knee rest.
• Inner thigh support for lateral positioning
• Raised arm board for lateral positioning
• Steinmein pin clamp
• Counter Traction post for tibia
• Hand traction Device

• The table manufactured and developed, exclusively for the ophthalmic surgeon is very stable and versatile.  Its ergonomic design ensures both surgeon and patient comfort.
• The table has a maximum height of 890 mm and minimum height of 610 mm ideal for standing of sitting working position.
• Choice of head sections give easy access to the patient, whilst allowing maximum leg-room and space for equipment/pedals.
• The adjustable cushioned head-rest ensures patient comfort and restraint during operations.
• Patient comfort is assured with deep antistatic poly-urethane cushions which are easy  to clean and are wide enough to allow patients to lie with their arms by their sides without the need for additional armbands.
• The adjustable wrist support provides comfort and stability while operating.
• Trendelenberg (head low position) and reverse trendelenberg facility ensures safety during emergencies.

OPTIONAL ACCESSORIES

• Optional Head rest with side trays
• Patient drape stand
• Additional I.V.Poles
• Surgical instrument tray

SPECIFICATIONS