The ‘SUPRIMA’ anaesthesia gas machine is a continuous flow system capable of delivering a mixture of oxygen & nitrous oxide gas and anaesthetic agents-a most flexible system of proven reliability and low service cost with latest safety features.  A totally indigenous product with prompt after-sales-service.

The standard equipment includes:

• Unitized rotameter block, to eliminate leakage, for oxygen & nitrous oxide. with fine adjustment control & colour coded knob and luminious back plate.  oxygen flow meter calibrated from 100 cc/min.  to 10 liters/min. & nitrous oxide flow meter from 220 cc/min. to 12 liters/min.  downstream receipt of oxygen.
• One goldman type vaporizer for halothene supplied as standard.  Provision to mount three vaporizers at a time.
• Non-return cum blow off valve in circuit ensures that pressure does not build-up beyond 200 cm.  water column & minimizes risk of back flow of gases.
• Two pin indexed yokes with pre-set regulators for oxygen & two for nitrous oxide with indicator gauge for easy identification.
• Circuit pressure gauge for easy determination of oxygen pressure in the line.
• Integratede safety features “nitrous lock” nitrous oxide supply interlocked with oxygen, making it impossible for nitrous to be administered to patient in the absence of oxygen supply in yokes.  In addition rotameter ensure protection (hypoxic guard) against singular flow of nitrous oxide until minimum 1.2 lit. of oxygen is released.
• An audible alarm is automatically activated if pressure of oxygen falls below 30 PSI.  Simultaneously it activates a peunmatice circuit to lock the flow of nitrous oxide.
• Over head shelf for monitor at eye level.
• Emergency drug  tray incorporated at convenient position.
• Instrument tray ,made from stainless steel.
• 60 PSI out let for driving Ventilator.
• Change over unit provided at a convenient place which allows the equipment to be used in both open & close mode & has an integrated oxygen flush and outlet for fresh gases.
• One open circuit of users choice (maggil’s/bain’s)
• Space for two additional medium size cylinder at the rear.
• Table structure constructed from sturdy square stainless stel/m.s. pipes and electrostatically powder coated.
• Circle absourber (optional) can be easily mounted on the left side of table frame.
• The Equipment is fitted with capacious drawer on four large diameter antistatic castor double ball bearing wheels for easy mobility and brakes on front wheels.

The ‘PRIMA’ anaesthesia gas machine is a continuous flow system capable of delivering a mixture of oxygen & nitrous oxide gas and anaesthetic agents.  It has been designed to simplify after sales service and is one of the most perferred anaesthetic unit with safety feature, yet economic.

The standard equipment includes:

• Unitized rotameter block, to eliminate leakage, for oxygen & nitrous oxide. with fine adjustment control & color coded knob and luminious back plate.  Oxygen flow meter calibrated from 100 cc/min. to 10 liters/min. & nitrous oxide flowmeter from 220 cc/min. to 12 liters/min. downstream receipt of oxygen.

One gold man type vaporizer for halothene supplied as standard. Provision to mount twoVaporizers at a time.

Non return cum blow off valve in circuit ensures that pressure does not build-up beyond 200 cm. water column & minimises risk of back flow of gases.

Two pin indexed yokes with pre-set regulators for oxygen & two for nitrous oxide with indicator gauge for easy identification.

“Auto Nitrous cut” nitrous oxide supply interlocked with oxygen, making it impossible  for nitrous to be administered to patient in the absence of oxygen supply in yokes.

An audible alarm is automatically activated if pressure of oxygen falls below 30 PSI. Simultaneously it activates a peunmatice circuit to lock the flow of nitrous oxide.

Over head shelf for monitor at eye level.

Emergency drug tray incorporated at convenient position.

Instrument tray made from stainless steel.

60 PSI out let for driving Ventilator.

Emergency Oxygen Unit with fresh gas outlet at convenient position.

One open circuit of users choice (maggil’s/bain’s)

Space for two additional medium size cylinder at the rear.

Table structure constructed from sturdy square stainless steel/m.s. pipes and electrostatically powder coated.

Circle absorber (optional) can be easily mounted on the left side of table frame.

The Equipment is fitted with capacious draws on four large diameter antistatic castor double ball bearing wheels for easy mobility and brakes on front wheels.

The ‘MINI’ anaesthesia gas machine is a continuous flow system capable of delivering a mixture of oxygen & nitrous oxide gas and anesthetic agents.

The standard equipment includes:

Unitized rotameter block, to eliminate leakage,for oxygen & nitrous oxide, with fine adjustment control & colour coded knob and luminious back plate.  Oxygen flow meter calibrated from 100 cc/min. to 10 liters/min. & nitrous oxide flowmeter from 220 cc/min. to 12 liters/min. downstream receipt of oxygen.

One goldman type vaporizer for halothene supplied as standard.

Non return cum Emergency Oxygen Unit with blow off valve in circuit ensures that pressure does not build-up beyond 200 cm. water column & minmises risk of back flow of gases.

One pin indexed yokes with pre-set regulator for oxygen & one for nitrous oxide with indicator gauge for easy identification.

Self sealing valve attachment for additional oxygen source from bulk cylinder/Central pipeline/medium size cylinder.

“Auto Nitrous cut” nitrous oxide supply interlocked with oxygen, making it impossible for nitrous to be administered to patient in the absence of oxygen supply in yokes.

An audible alarm is automatically activated if pressure of oxygen falls below 30 PSI. Simultaneously it activates a peunmatice circuit to lock the flow of nitrous oxide.

Over head shelf for monitor at eye level.

Emergency drug tray/bins incorporated at convenient position.

Instrument tray made from stainless steel.

One open circuit of users choice (maggil’s/bain’s)

Space for one additional medium size cylinder at the rear (Total three cylinders can be attached at a time).

The Equipment is fitted with suitable drawer on four castor wheels for easy mobility.

ESU – 400 is an Universal & Efficient Electro Surgical Unit.

Semi Digital Unit Provided feather touch push buttons for output mode selection and analog control for power selection. Monopolar Cutting and coagulation, Bipolar coagulation, Spray coagulation with pure and Blend output modes.  Ideal for TUR and other Major Surgical Procedures.

ESU – 400 E is an Universal & Efficient Electro Surgical Unit.

Semi Digital Unit Provided feather touch push buttons for output mode selection and analog control for power selection. Monopolar Cutting and coagulation, Bipolar coagulation, Spray coagulation with pure and Blend output modes.  Audio-visual alarm in case of patient earthing plate/device  disconnects.  Ideal for TUR and other Major Surgical Procedures.

ESU-402

Semi Digital Unit Provided feather touch push buttons for output mode selection and analog control for power selection. Monopolar and Bipolar output modes with Macro and Micro power modes.  Choice of Cut Mode by pure and Endo-cut and choice of Coagulation Mode by contact and spray coagulation mode.

Audio-visual alarm in case of patient earthing plate/device disconnects.

Most efficient model for TUR and other Major Surgical Procedures.

ESU – 402 D

An Universal and efficient unit with digital and analog display devices controlled by dual microprocessors, provides high level performance and safety.

Dual R.F. power display digital as well as analog by knob control adjustment for both monopolar cutting/ciagulation and bipolar coagulation.

Monopolar and Bipolar output modes with Macro and Micro power modes.  Choice of Cut Mode by Pure and Endo-Cut and choice of Coagulation Mode by contact and spray coag mode.  Audio-visual alarm in case of patient earthing plate/device disconnects.

Advanced Digital (Dual) model for TUR and other Major Surgical Procedures.

ESU – 300

Semi Digital Unit Provided feather touch push buttons for output mode selection and analog control for power selection.

Monopolar Cutting and coagulation, Bipolar coagulation, Spray coagulation with pure and Blend output modes.

Ideal for General/Orthopaedic Surgical Procedures.

FIBER OPTIC LIGHT SOURCE

Double Bulb/Outlet Fiber Optic Light Source with universal Fitting Socket.  Fitted with Durable & efficient Transformer with two Halogen Bulbs with reflector.

Standard Accessories

(For Electro Surgicals Unit Cautry Machine )

High Quality Silicon Assessories

Sterilization system device for airborne disinfection in medical environment, Hospital, Surgeries, Dental, offices and diagnosis rooms.

AIR PURIFICATION CUMSTERILIZATION SYSTEM

STAGE-1 Dust filter traps particles upto 15 microns.  This includes dust particles, hair, lint fibers, insects and other particulate substance above 15 micron.

STAGE-2 Second filter traps particles up to 5 micron size such as fine dust particles, pollen grains etc.

STAGE-3 Activated carbon filter removes odors, fumes, inorganic substances such as NO2 and CO and organic compounds such as formaldehyde and fumes of halothene and other chemicals.  Activated Carbon adsorbs particles from air.

STAGE-4 UV rays (2537 A0 or 253.7 nm) kill microbial cells present in air by destroying their genetic material with an efficiency of 90 – 99%

STAGE-5 A Digital Negative lon Generator is another excellent feature which ultimately leads to better air quality.  Negative lon get attached to dust particles/pollutants making them heavier and precipitate them on the floor.  This leads to cleaner air.

STAGE-6 Hepa Filter traps all biotic and abiotic particles known to be present in the air.  0.3 micron porosity of the filter results in 99.97%  effidiency.  Only pure air passes through this porosity.

STAGE-7 Electrostatic precipitator, a wonderful feature, high D.C. current which attracts & retains all the pollutants of air that pass through it.

STAGE-8 Ozonation system with a programmable digital timer.  Ozone sterilizes  air by oxidation of inorganic and organic substances.  99.9% of bio contaminants are killed and eliminated by Ozone.

When the system is producing Ozone (Stae-8) then Stages- 4, 5, 6 & 7 are automatically switched off and vice-versa

TECHNICAL SPECIFICATION:

Dimensions                    :28” x21” x 10”   Area Recommended: up to 4000 Cubic feet

Gross Weight       :22 kg (Approx) Digital Timers        : Two (for mains and Ozone)

Voltage Required :230 V AC, 50 Hz

---

Perfect UV Sterilization through UV ray penetrates direct into bacteria and raises various kind of biochemical reaction itself then bacteria die out or fall into a functional disorder.  Especially, UV rays strike directly bacteria’s DNA and have a fatal influence on it.  These UV rays work directly on most bacteria’s DNA sequences and raise disorder itself then inactivate bacteria’s cell perfectly.

FIVE STEPS OF STERILIAZTION

Step-1                  Dust Filter:- large particles of dust such as strands and hairy-dusts are filtered at this stage.

Step-2 15 Micron Filter:- Minute particles floating in air are filtered from this filter.

Step-3 Carbon Filter (Optional):- Thanks to the  functions of strong deodorization and decomposition, carbon filter removed to bacco smoke, a smell of food and most of odours.

Step-4 U.V. Filter:-  Equipped with two 8 watt U.V. lamp, it effectively sterilizes the air.

Step-5 Ionizer (Optional):- This Negative lon generator generates large quantities of negative lons thus if fells fresh and comfortable.

Ultra Violet  sterilizer can be effectively installed at different places like Operation theather, ICCU, ICU, NICU, Post Operative wards, Trauma Wards, Mortuary etc.

TECHNICAL SPECIFICATION

Dimension                     :         H 13 Inch. x W 14.5 Inch. x D 9.5 Inch.

Gross Weight                 :         4.00 kg. (Approx.)

Voltage Required           :         230V AC 50 Hz

Power Consumption      :         50 W

BED INTENSIVE CARE UNIT

SALIENT FEATIRES:

Elegant Intensive care hospital bed for comfortable recovery of patient under cumbersome conditions with various important positions available as per surgeon’s requirement with trolley base, frame made of precise strong steel tubes mounted on 150 mm dia swivelling castors; two with brakes, Four section top of perforated machine press bent CRCA sheets.  Back-rest, knee-rest and Trendelenberg /reverse Trendelenberg positions maneuvrable by separate screws.  Height adjustable to facilitate close observation by medical staff and convenient transfer of patient from bed to trolley and vice-versa.  Height adjustment could be achieved with ease on smooth crank mechanism.  SS detachable head and leg bows fitted with laminated panels for easy access to the patient.  Rubber buffers are provided to prevent damage to the bed and absorb shock.  SS detachable collapsible side railing provided.  SS telescopic saline rod at 4 location.

Overall Size: 80Lx36Wx24H Inch.

Finish: Epoxy Powder Coated

HOSPITAL FOWLER BED (DELUXE)

SALIENT FEATURES:

Frame work made of strong and precise steel tubes on “H” type legs mounted on 10 cms castors; two with brake.  Four section top of perforated CRCA sheets machine pressed & bent with mattress guards.  Back-rest and Knee-rest sections maneuverable by two separate screws from foot end.  Laminated panels fitted with SS head and foot Bows.  Provision for saline rod.

Size: 78Lx36Wx24H Inch.

Finish: Epoxy Powder Coated

HOSPITAL FOWLER BED (GENRAL)

SALIENT  FEATURES :

Frame work made of strong and precise steel tubes mounted on 10 cms swiveling castors.  For section top of perforated CRCA sheets machine pressed and bent. Back-rest and Knee-rest section maneuverable by two separated screws froom foot end Tubuler head and foot bows  of unequal height with vertical tube supports. Provision for saline rod.

Size: 78Lx36Wx24H Inch.

Finish: Epoxy Powder Coated

HOSPITAL SEMI  FOWLER BED (DELUXE)

SALIENT FEATURES:

Frame work made of strong and precise steel tubes on “H” type legs mounted on rubber stumps.  Two sections top of perforated CRCA sheet machine pressed and bent with mattress guard.  Back-rest section maneuverable by screw from food end.  Laminated panels fitted with SS head and  foot bows.  Provision for saline road.

Size: 78Lx36Wx24H Inch.

Finish: Epoxy Powder Coated

CEILING/MOBILE SPRING SUSPENSION SHADOWLESS OPERATION LIGHT (20” DIA. DOME SINGLE DOME)

Improved high technology light deliver high intensity cold light.  Fully spring balanced.

Fitted with two halogen bulb of 24v-150w and special heat absorbing & colour correction filter glass.  Reserve light source with double bulb system and dimmer control.  A removable type sterilizeable handle fitted in the middle of dome for easy movability of light during surgery.  Beautifully designed & finished in white PU paint.  Light intensity – 65,000 + 10% Lux.

CEILING SPRING SUSPENSION SHADOWLESS OPERATION LIGHT (20” DIA.  DOME TWIN MODLES)

Improved high technology light deliver high intensity cold light. Fully spring balanced. A perfect light for all Major surgical procedures.

Two domes highly mirror finished. Each fitted with halogen bulbs of  24v-150w and special heat absorbing & colour correcting filter glass. Provision for stand by bulb for emergency. Low voltage transforms with volt selector switch. Removable type sterilizeable handles fitted in the middle of each dome for easy movability of light during surgery. Beautifully designed & finished in white PU paint. Light intensity –65,000 + 10% Lux each dome.

CEILING / MOBILE SPRING SUSPENSION SHADOWLESS OPERATION LIGHT (22” DIA. DOME WITH 4 REFLECTORS)

Fully spring balanced improved light with four halogen bulb of  24v-70w and special heat absorbing & color correcting filter glass. A removable type sterilizeable handle fitted in the middle of the dome. Supplied  with low voltage transformer unit with intensity selector switch. Angular radial and axial movements. Easy movability. Beautiful designed & finished in white PU paint. Lightly intensity – 65,000 + 10% Lux (also available in 12v-55w & 12v-50Watt)

CEILING SPRING SUSPENSION SHADOWLESS OPERATION LIGHT (TWIN MODEL) 22” DIA. DOME WITH 4+4 REFLECTORS

Fully spring balanced improved high intensity light of all major surgical procedures.

Both the domes are fitted with halogen bulbs of 24v-70w (four bulb) each. Provided with heat absorbing and colour correcting glass filters. Each dome fitted with a removable type sterilizeable cum focusing handle for feather touch movements. Supplied with low voltage transformer. Beautiful designed & finished in white PU paint. Light intensity -65,000 + 10% Lux (also available in 12v-55w & 12v-50Watt).

CEILING SPRING SUSPENSION SHADOWLESS OPREATION LIGHT (28” DIA. DOME 7 REFLEDTORS)

Fully spring balanced improved high intensity light for all major surgical procedures.

Halogen bulb of 24v-70w and special heat absorbing glass filters. Easy movability by semi circular handle fitted outside the dome to angular,  radial and axial movements. Supplied with low voltage transoformer unit with intensity selector switch. Beautiful designed & finished in white PU paint. Light intensity -80,000 + 10% Lux at one meter distance. (also available in 12v-55w & 12v-50w)

CEILING SPRING SUSPENSION SHADOWLESS OPERATION LIGHT (TWIN MODEL) 28” DIA. DOME WITH 7 REFLECTORS & 22” DIA. DOME WITH 4 REFELECTOR

Fully spring balanced improved high intensity light all major surgical procedures.

Both the domes are fitted with halogen bulbs of 24v-70w each. Provided with heat absorbing and colour correcting glass filters. Each dome fitted with a removable type sterilizeable cum focusing handle for feather touch movements. Supplied with low voltage transformer. Beautiful designed & finished in white PU paint. Light intensity -80,000 + 10% Lux at one meter distance (Seven reflector dome) +65,000 + 10% Lux at one meter distance (four reflector dome) (also available in 12v-55w &12v-50w)

CEILING /MOBILE SPRING SUSPESION SHADOWLESS OPREATION LIGHT (19” DIA. DOME SINGLE DOME 0 FIBER DOME WITH GLASS RELECTOR

• Fiber Dome Dia 19” each Fitted with Parabolic Glass Reflectors to provide high quality shadowless illumination..
• Fitted with best quality Special diffusers.
• Illumination 90,000 + 10% lux at one meter distance.
• 360° Rotation at both angle’s in celling light.
• Fitted with imported halogen bulb 24 V-150 W, provided with standby bulb/light source.
• Fully spring balanced technology fitted with detachable & Sterilizable handle.
• Heavy duty step down transformer.
• Provision to change the bulb by single push button system.(without any tool)
• Also available in wall mount.

CEILING/MOBILE SPRING SUSPENSTION SHADOWLESS OPERATION LIGHT (19” DIA.  DOME DOUBLE DOME) FIBER DOME WITH GLASS REFLECTOR

• Fiber Dome Dia 19” each Fitted with Parabolic Glass Reflectors to provide high quality shadowless illumination.
• Fitted with best quality Special diffusers.
• Illumination 90,000 + 10% lux each dome at one meter distance.
• 360° Rotation at both angle’s in celling light.
• Fitted with imported halogen bulb 24V-150W, provided with standby bulb/light source each dome.
• Fully spring balanced technology fitted with detachable & Sterilizeable handle.
• Heavy duty step down transformer.
• Provision to change the bulb by single push botton system.  (Without any tool).

CEILING SPRING SUSPENSION SHADOWLESS OPERATION LIGHT (19” DIA.  DOME FOUBLE DOME + MONITOR / CAMERA ATTACHMENT) FIBER DOME WITH GLASS REFLECTOR.

• Fiber Dome Dia 19” each Fitted with Parabolic Glass Reflectors to provide high quality shadowless illumination.
• Extra Arm with plateform for provision of monitor/C.C. camera.
• Fitted with best quality Special diffusers.
• Illumination 90,000 + 10% Lux in each Dome at one meter distance.
• 360° Rotational both angle’s in ceiling light.
• Fitted with four (two + two) imported halogen bulb 24V-150W, provided with standby bulb/light source each dome.
• Fully spring balanced technology fitted with detachable handle in dome.
• Heavy duty step down transformer.
• Provision to change the bulb by single push button system (Without any tool).